Vibratory Finishing Machines are mass finishing machines, used for deburring, polishing, descaling etc  for metalic and non metalic  parts.

The machine has a steel bowl lined with polyurethane which is filled up with required media (either ceramic, plastic,porcelain, maize etc. depending upon the finish required) and components. Eccentric weights are mounted on an extended shaft attached to a heavy duty motor to cause vibrations and create a spiral of the media and the components. Variations in vibration, achieved by varying weights and angles, and suitable combination of media enable machine to be used for different components.

MACHINE  WITHOUT  PART SEPARATION 
MODEL   VOLUME  (LTRS)  BOWL DIAMETER POWER (HP)  PU THICKNESS
FTV 40 40 650 0.5 14-16
FTV 80  80 950 0.75 18-20
FTV 160  160 1080 1.5 22-24
FTV 250  250 1200 2 24-26
FTV 350  350 1400 3 24-26
FTV 600 600 1600 5 24-28
FTV 800  800 1700 5 24-28
FTV 1200 1200 1900 7.5 26-28
         
All dimensions in mm    
Higher capacity on request    
Subject to Technical Modifications.    

Machine With 100% Separation Of Parts

These machines are designed for complete separation of parts from media after process unlike standard auto separation
machine in some case.

The machine is made with an inbuilt spiral path through which media and parts moves during regular process cycle. There is a flapper
mechanism provided at the maximum level of the spiral so that it can be closed and the whole mass will be transferred to separation
sheet during separation cycle. This spiral geometry ensures 100% mixture is carried to the screen.

MACHINE WITH 100% SEPARATION

         
MODEL    VOLUME BOWL DIAMETER POWER (HP)  PU THICKNESS 
FTVSS 250  250 1050 1.5 24-26
FTVSS 350  350 1220 2 24-26
FTVSS 550  550 1460 3 24-26
FTVSS 900  900 1770 5 24-26
FTVSS 1800 1800 2200 7.5 24-28
         
All dimensions in mm    
Higher capacity on request    
Subject to Technical Modifications.