Centrifugal Disc Finishing Machines

Centrifugal disc finishing systems from FIN TECH offer lower operating costs and a better finishing performance than vibratory
finishers. Centrifugal disc machines can perform a wide range of deburring and polishing functions at 10 to 30 times the speed
of vibratory finishers. Centrifugal disc machines operate using a drum with a disc at the bottom that rotates to create a rolling
action with parts and media. The spinning of the disc forces parts and media upward while also providing rotation. Continuous
rolling and flowing of the parts against the media provides highly efficient deburring and finishing. The inside of the finishing
drum and disc are covered with a polyurethane liner that can stand up to repeated and constant use.

 PRECISION CENTRIFUGAL DISC MACHINES 
Model Volume of Disc Processing Volume Power (HP) Rotating Speed R/M
FTD 9 9 5 1 0-400
FTD 18 18 9 1.5 0-400
FTD 35 35 25 3 0-400
* Combination of 2and 3 disc is available in all the above model
* For Wet or Dry gap .15mm – .2 mm, min thickness of work piece .5mm
HIGH PRECISION CENTRIFUGAL DISC MACHINES 
Model Volume of Disc Processing Volume Power (HP) Rotating Speed R/M
FTD 18 W 18 9 2 130-250
FTD 18D 18 9 2 130-250
FTD 32W 32 25 3 130-250
FTD 32D 32 25 3 130-250
FTD 50W 50 42 3 130-250
FTD 50 D 50 42 3 130-250
* Combination of 2and 3 disc is available in all the above model
* W= For wet process gap 0mm, minimum thickness of work piece is .1mm
*D= For Dry process gap .05mm, minimu thickness of work piece.15mm
CENTRIFUGAL DISC MACHINES WITH AUTO UNLOAD,SEPARATOR
Model Volume of Disc Processing Volume Power (HP) Rotating Speed R/M
FTDA 50 50 25 2 0-180
FTDA120 120 60 5 0-170
FTDA 240 240 130 7.5 0-130